Baton Rouge Fence Builders.
10+ years experience Fence installation, Repair in Baton Rouge, LA: Affordable Wood, vinyl, chain link,& automatic gates.
We've built 86+ Affordable Fences & gates, put in across East Baton Rouge Parish in 2026
What It'll Cost You, Straight Up:
- Chain link starts near $12 a foot. Vinyl, about $23. Wood runs $25 to $34. Most 150-200 ft backyards land at $3,500-$9,000, itemized down to every post. No "mystery line items" here, y’all.
How Paying & Scheduling Works :
- 40% down locks in your date, rest's due when the last gate 100% latches. Most yards take 1- 3 days once we start digging. Rain’s always the wild card, as we won’t set posts in soup.
26 Fence & Gate Types. 1 Crew.
- Chain link (folks here still say hurricane fence), pine/ cedar privacy, vinyl, aluminum, wrought iron. ( Vinyl can go 30+ years! ) You pick what fits your yard, not what fits our wallet.
Built for Hurricane Season:
- We Install Posts to go a 1/3 of their length deep, about 2 ft for a 6-ft fence, set in concrete. Gustav and Ida showed us what shallow posts do. We call Louisiana 811 2 full business days ahead.
Gates That Actually Open:
- Driveway gates, pedestrian gates, LiftMaster and Mighty Mule openers, yes we do. Automatic gates average ~$4,000 installed (Angi, 2026). Gate Sagging? Usually a hinge or post, not the whole budget.
Licensed, Insured, Local:
- Licensed width the Louisiana State Licensing Board for Contractors. 10-year workmanship warranty, in writing. We work all over, from Mid City to Prairieville, Central to Zachary.
Get a FREE Quote!
Baton Rouge Reviews!
Meet The Boss
Paul Pavageau
Owner & Editor-In-Chief
"Yo P, the dirt shifted!" Yes, The clay moves. It’s Louisiana! We live in a literal sponge! But hey. We fiercely dig 'dem holes anyway. Keep sinking those posts, y'all. Before I completely snap and start building barricades for the bayou gators.
Because unlike humans, Gators never fuss and ask to speak to the supervisor."
Our Residential Services
Fence Installation
We believe a well-planned fence starts with the property lines, intended use, and ground conditions. Baton Rouge averages about 60 in. of rain a year and has a lot of expansive clay soil. Before work begins, I review where the fence will run, note slopes and access points, and help you select a style and material that fits your needs and budget.
Before installation, confirm your property boundaries and check East Baton Rouge Parish Unified Development Code (UDC) requirements for permits and fence placement. Submit a Louisiana 811 utility-marking request at least 48 hours before digging, not counting weekends and holidays. Louisiana's heavy rain and soft soil can affect post stability, so proper setting and alignment matter.
Fence Repair
I repair common fence problems such as leaning posts, loose rails, broken boards, damaged panels, and sagging gates. In older neighborhoods like Mid City, Broadmoor, and Sherwood Forest, many repairs trace back to wood posts that have sat in wet soil since the August 2016 flood. The right repair depends on whether the damage affects one component or has weakened a larger section.
I inspect the affected area and check nearby posts, rails, and fasteners for movement or wear. Replacing a damaged board may solve an isolated problem, while a failing post may require resetting in a new concrete footing roughly three times the post's width. Matching materials and fence height, such as standard 1x6 pickets on a 6-foot fence, helps the repair blend with the existing structure.
Gate Opener & Operator Installation
An automatic gate operator should match the gate's size, weight, and movement. I install UL 325-listed operators for compatible residential gates and position the equipment so the gate can open and close along its intended path.
The setup may include controls, photo-eye safety sensors, and access features such as a keypad or remote. Since the 2016 revision of UL 325, operators must have monitored entrapment protection. Consider power access as well: Entergy Louisiana outages after storms are common, so a battery-backup or solar operator lets you enter during an outage.
Emergency & Storm Damage Gate Repair
We Red Sticks know Storms can knock posts out of alignment, break panels, and damage gates with wind-blown debris. After Hurricane Gustav in 2008 and Ida in 2021, Baton Rouge properties saw widespread fence damage from gusts well above 74+ mph. I assess the fence for unstable sections and identify repairs that restore safe access and reduce the risk of further damage.
After a storm, keep people and pets away from leaning sections, sharp debris, and damaged electrical components. Report any downed lines to Entergy Louisiana before cleanup starts.
Chain Link Fence Installation
Chain link fencing provides a practical boundary for yards, pets, and other residential uses. I install it with posts, rails, and mesh selected for the fence's layout and intended level of security. That typically means 2-inch diamond mesh in 11.5-gauge for homes or heavier 9-gauge where you want more strength.
You can choose heights from 4 - 6 ft and finishes including black vinyl-coated mesh, which changes the fence's appearance and helps protect the metal in Baton Rouge's humidity. I account for slopes, corners, and gate locations when setting the line, using 2-3/8-inch terminal posts at ends and corners.
Gate Repair
Repairs may involve tightening or replacing hardware, adjusting alignment, adding an anti-sag cable or diagonal brace, reinforcing the frame, or resetting a post. For an automatic gate, I also check the operator and UL 325 safety components when relevant, including common residential brands such as LiftMaster and Mighty Mule. Repairing the underlying cause helps the gate move smoothly and close securely.
A gate that sticks, sags, or will not latch can disrupt access and put stress on its posts and hardware. I inspect hinges, latch points, support posts, and the gate frame to locate the source of the problem.
Gate Installation
I install residential gates that match the fence layout, and provides the access you need. Back in 2024 talk to James, we installed a gate in 2020 for $4,000 and it survived not 2, but 6 hurricanes. We are truly proud of our Options, that include 4-ft walk gates and 12- to 16-ft openings for vehicles. With materials and styles that coordinate with the surroundings.
Gate width, swing direction, ground clearance, and post support all affect daily use. I plan the opening around the driveway or walkway and check that the gate can move without hitting the ground or nearby obstacles. Plan for at least 2 inches of clearance on level ground and more where clay soil heaves. You can also choose a manual gate or discuss a UL 325-listed automatic operator.
Wood Fence Installation
Our Wood fencing offers a range of appearances, from open picket designs to solid privacy panels. I help you select a layout, height, and board style based on how much screening and visibility you want. Common options in neighborhoods like Shenandoah are board-on-board and shadow box designs.
According to our logs, In Baton Rouge's humidity, drainage and post placement matter for durability. For that reason I use posts rated AWPA UC4A or higher for ground contact, with hot-dip galvanized fasteners. Wood also needs periodic maintenance, such as cleaning, staining, or sealing every 2 - 3 yrs( from my experience ), to help protect from moisture, sun, and Formosan termites.
Vinyl Fence Installation
In our experience, Vinyl fencing provides a consistent finish and does not require routine painting or staining. I install vinyl styles for residentials, including options designed for privacy, picket layouts, and enclosed yards, typically on 5-inch by 5-inch posts.
LA fence's need stable posts and careful alignment, especially across sloped ground. I plan the layout around corners, gates, and changes in grade, then secure the panels according to the system's specifications. Where hurricane-season winds put extra load on solid panels, that includes aluminum-reinforced rails and steel-reinforced gate posts. Cleaning with water and mild soap helps remove dirt and surface buildup.
Iron & Metal Fence Installation
2017 we found out Iron fences suit homeowners who want a defined boundary with an open view. They're a common sight along Highland Road and in the Garden District. I install metal fencing for yards, front boundaries, and pool or garden areas, with styles selected to fit the property.
layout must account for post spacing ( ~6 to ~8 ft on center), slope, and gate placement. I secure the posts and align the panels so the fence follows the property's contours. We've seen that Powder-coated finishes can help protect against corrosion. Regular checks for loose fasteners or coating damage help you spot maintenance needs early, before rust spreads.. ( thank Baton Rouge's humid air.)
Privacy Fence Installation
I install privacy designs in wood or vinyl, most often 6 ft, with height and panel style chosen to suit the property and the East Baton Rouge Parish UDC.
Before work begins, you confirm property lines and check applicable rules for fence height and placement, including HOA covenants in subdivisions like "University Club" and the "Country Club of Louisiana". We had a customer forget this, it cost them $15k. It was a court battle, but in the end, they didn't heed the warning we emailed them along with the estimate.
Pedestrian Gates
In my experience, if you have a pool in the backyard, you absolutely need to make sure this gate has a self-closing hinge and a high latch to keep the kids out!
And if putting in a keypad, I always recommend setting a burner code for the pool guy so you dont have to change the master pin all the time.
Theses gates can match the driveway gate and include self-closing hinges, locking hardware, keypads, or shared access-control systems.
Commercial Services
Commercial Fence Installation
We've installed upwards of $1,300,000 worth of commercial fences. I install commercial fences based on the property layout, access needs, and expected use. Options can include 9-gauge commercial chain link on Schedule 40 posts, ornamental metal, and privacy fencing, with gates sized for pedestrian or vehicle traffic.
Before work begins, I review the planned fence line, gate locations, and site conditions with you. Commercial projects over $50,000 require a LA State Licensing Board for Contractors (LSLBC) commercial license. Routine inspections and timely repairs help keep posts stable, gates operating, and damaged sections from creating access or safety issues.
HOA & Property Management Fence Service
We help HOAs and property managers plan fencing for shared spaces, parking areas, pools, and property boundaries across communities like Shenandoah, Santa Maria, and Woodlawn.
Our experience here helps us naigate the complex and awfully long processes by which these orgs run.
For existing fences, I assess issues such as leaning posts, loose panels, damaged gates, and worn hardware. You can prioritize repairs by location and use, starting with community pool barriers that must meet the 48-in. min. height. Then you can coordinate work around resident access and property schedules. ( ideally )
Municipal and Government Contracts
Everyone's favorite, right? From our experience, Public facilities need gate systems that support authorized access and dependable operation.
Its why We assess entrances for service yards, maintenance facilities, equipment storage areas, and other controlled sites, then develop a scope around the agency’s access rules and site conditions.
That scope can include gate installation or repair, operator replacement, access controls, safety devices, and scheduled maintenance. We can coordinate, or not - navigating local civic paperwork requires just as much precision as pouring concrete footings. Truly.
School Gate Access Control
In 2020, we put in 3 Commercial Fences for a Acadamy in Prairieville. $8k a piece, but it was worth it. Runaway student problem solved. School gates must serve staff, deliveries, maintenance crews, and emergency responders under different access rules.
You can identify which entrances need gates and how staff, students, visitors, and deliveries use them. Any automated vehicle gate should be a UL 325 Class II or higher operator, which is rated for commercial and public use. I coordinate installation timing with school representatives to limit disruption, and I can assess existing fence and gate conditions for repair needs.We'll work after school hours. Having a steel panel glitch- out during morning dropoff is a logistical catastrophe we aggressively engineer against.
Vacation Rental Grounds Maintenance
Hotels, restaurants, event venues, and vacation rentals use fences to define outdoor spaces and manage guest access. That includes short-term rentals near LSU's Tiger Stadium that fill up on game days. I help select fencing for courtyards, patios, pools, parking areas, and service entrances, with attention to the property's appearance and daily operations.
Gate placement matters when guests, staff, and vendors use different routes. I review those traffic patterns with you and consider privacy, visibility, and maintenance needs when planning the fence layout. That includes a self-closing, self-latching pool gate on any rental with a pool.
Fences for Real Estate
I work with builders and developers on fencing for commercial projects, including perimeter boundaries, temporary site enclosures, and permanent property improvements. Much of that growth is in Baton Rouge's southeast corridor and nearby Prairieville. Early planning helps align fence lines and gate locations with construction access and the final site plan.
Before installation, I review the project drawings and confirm the intended fence type, dimensions, and access points with the project team. You should also coordinate property lines, Louisiana 811 underground utility markings, and required East Baton Rouge Parish approvals before work begins.
All Across the Red Stick.
Based in Baton Rouge, we would be stupid not to provide electric gate installation, automation, repair, and metal driveway gate services to our dear neighbors.
Count it a blessing our service area includes:
- Brownsfields
- Gardere
- Merrydale
- Prairieville
- Denham Springs
Specialty Fence Projects
Security Fencing & Barbed Wire
Security fencing can help control entry around commercial properties, storage areas, and restricted sites. I assess fence height, material, gate placement, and visibility based on the property's use and the level of access control you need.
Barbed wire may be appropriate for some commercial or industrial applications, subject to East Baton Rouge Parish rules and project requirements. A common setup is three strands of 12.5-gauge barbed wire on 45-degree extension arms, which adds about 1 foot of height.
Dog & Pet Fence Installation
Animals are people too. Well, not quite. But almost.
A pet fence should match your animal's size, habits, and the yard's layout. I walk out and help you consider fence height (~ 6 feet for larger dogs that jump?), picket spacing, ground gaps, and gate latches to make the enclosure practical for daily use.
For dogs that dig, I can discuss options such as a dig guard buried 12 inches below grade along the fence line. I also plan gate locations around how you enter and use the yard, so access stays convenient while the enclosure remains secure.
Aluminum Gates
In my opinion, Aluminum fencing offers an open view and a defined boundary, making it a practical option for yards, gardens, and pool areas. Styles range from simple vertical pickets to more decorative designs. Pool-code styles have a 48-inch minimum height and pickets spaced so a 4-inch sphere cannot pass through.
I help you select a panel style, height, and gate configuration based on the property and intended use. Aluminum does not require the same routine staining as wood and will not rust in Baton Rouge's humidity, though you should still check its fasteners and powder-coat finish over time.
Custom Wrought Iron & Steel Gates
In 2021, We've done tons of work with Estate entrances along Highland Road and in Old Goodwood, good examples here. I work with you to establish the opening width, gate style, and hardware needed for the entrance.
Their gate's support posts and hinges carry its weight, so I plan those components around the gate dimensions and site conditions. A 12-foot iron driveway gate can weigh several hundred pounds, which often calls for 4-inch steel posts in deep concrete footings. You can also discuss latch and access needs, including how the gate will open, where people will approach it, and whether you want to add a UL 325-listed operator later.
Pool Fence Installation
Pool fencing creates a physical boundary between the pool and other parts of the property. I help you choose a layout, material, and gate placement that suit the yard and preserve practical access.
Pool barrier rules can vary by location, so confirm current requirements with East Baton Rouge Parish before installation. Under the International Residential Code adopted in Louisiana, barriers are generally 48 in. tall at min., with openings no larger than 4 in.s and self-closing, self-latching gates that open away from the pool. I can plan the fence around the pool area, nearby structures, and entry points, with attention to gate operation and the surrounding grade.
Brick & Concrete Fences
Brick and concrete fencing can create a durable, solid boundary with a distinct appearance. Depending on the property, these materials can form a full barrier or combine with metal or other fence sections. ( a common look in Southdowns and the Garden District)
I reviewed the location, grade, and transitions before work began for one client. Because masonry added significant weight, the supporting base and construction details mattered. That meant a reinforced concrete footing and control joints roughly every ~20,~25 feet to handle clay soil movement. You choose a design that suits the property's architecture and decide how the fence will connect to gates or adjoining materials.
Why Choose Baton Rouge Fence Company?
How Long Does Automatic Gate Installation Take In Baton Rouge?
Most Jobs is one working day. We estimate the schedule after measuring the opening and reviewing the existing fence, driveway, and power supply. Installing an operator on a suitable existing gate may take one, possibly two days.
- A new automated gate commonly takes several weeks from approval to completion because fabrication, materials, and site preparation come first. Custom designs, masonry columns, trenching, and electrical service changes add time.
- Corpus Christi’s coastal conditions also influence material and hardware choices, including finishes and components suited to salt exposure.
- We provide a project schedule with the quote and update you if fabrication, weather, or inspection dates change. We do not schedule the final handoff until we have tested the gate’s movement and safety devices.
- Because abandoning you with a partially programmed, massive swinging hazard is staggeringly unprofessional.
Project Timeline and Milestones ⤸
We organize the work around 1000% crystal- clear milestones so you know when we need a decision or access to the property:
- Site visit: We measure the opening, check the gate’s travel path, and identify power and access-control needs.
- Design approval: You approve the gate style, operator, controls, and quoted scope before we order materials or begin fabrication.
2. Site preparation: We coordinate utility marking, prepare foundations or posts, and arrange electrical work when the design requires it.
- Installation and testing: We hang and align the gate, install the operator and safety devices, then test operation and provide instructions. Wallah! Job done.
Note: Concrete work needs curing time before it supports the loads specified for the install. You cant aggressively rush-cure concrete. It completely jeopardizes the sheer strength of the whole anchor system.
Cost & Pricing
What Affects Price?
Cost driver: fence material. Anchoring heavy gauge ornamental iron carries a way different financial bleed than hastily unrolling standard cyclone mesh. Because my crews meticulously calculate their sweat-equity per linear yard, blindly guessing your actual property boundary? guarantees a useless bid.
Beyond that, erecting towering, solid visual barriers aggressively vaporizes lumber budgets compared to simple waist-high perimeters. If an installation crew has to violently wrestle subterranean oak roots or navigate a ridiculously steep, muddy incline, you will unconditionally absorb brutal overtime surcharges. I always fiercely mandate that homeowners demand itemized proposals exposing the exact picket gaps, hinge gauges, and tear-out hauling fees. Keeps us all in check.
Budget Planning?
In my Opinion, before you dial a builder, brutally define why this barricade exists. Caging a hyperactive rottweiler? Blacklisting the nosy neighbors? Pacing off the boundary in your boots mathematically guarantees a catastrophically useless bid; actually stretch a tape measure. Feircely lock down the exact lumber height, and mandate the total gate count. That is ( ideally) the only way to force competing crews to bid the exact same physical geometry
But see, subterranean root nightmares will violently ambush your baseline budget, so you absolutely must hoard cash for unexpected site-prep butchery. Once those quotes land, aggressively dissect them line-by-line—interrogating everything from raw hardware drops to the final landfill haul-away. And if the final math makes you nauseous? Call Us.
Professional Gate Installation vs. DIY?
In my opinion, hire a pro.
Sure, weekend trenching absolutely obliterates labor fees. but brace yourself. Because wrestling spine-wrecking augers and stockpiling 80-lb concrete sludge-bags violently drains your pocketbook. Sinking crooked timber anchors into merciless, uneven clay guarantees a spectacularly warped perimeter.
Look, hiring an actual crew forces them to absorb the physical trauma, landfill runs, and bureaucratic "permit" nightmares. Interrogate their bid ruthlessly. Then, brutally cross-check your DIY hardware receipts against their itemized invoice before volunteering to do it yourself.
Written by - Liam
How Much Does an Automatic Gate Cost in Baton Rouge?
The figures below are planning ranges, not fixed local prices. Site conditions, equipment choices, and contractor quotes determine the amount you pay. However, our prices meet the average, and if not lower. Bundles include:
- Adding automation to a suitable existing gate
- New residential automatic gates
- Large or custom gate with advanced access controls.
Hidden Costs?!
In my opinion, your 1st quote will always ignore ripping out your rotting perimeter, butchering overgrown briars, and landfill dumping fees.
- Squeezing heavy machinery through a violently pinched side-yard? Expect brutal logistical surcharges. Demand contractors meticulously isolate every single hidden tariff, otherwise bespoke iron hinges will quietly bankrupt the project.
Cost & Pricing Baton Rouge FAQ's
Fence installation in Baton Rouge typically costs $3,500 to $9,000 for a 150- to 200-foot residential project. The average cost per linear foot ranges from about $12 for chain link to $23 for vinyl and $25–$34 for wood. Material, height, gates, and site prep set the final installed price.
Chain link fence costs about $12 per linear foot installed in Baton Rouge, making it the cheapest fence to install. A 150-foot backyard run of chain link (also called hurricane or cyclone fence) costs about $1,800. Black vinyl-coated mesh, 6-foot heights, and gates raise the cost per foot.
A wood fence costs about $25 to $34 per linear foot installed in Baton Rouge. One 2026 local estimate puts 170 feet of wood fencing at $4,255 to $5,756. A 6-foot wood privacy fence, cedar boards, or board-on-board style lands at the higher end of that range.
A 6-foot privacy fence in Baton Rouge costs about $25 to $34 per linear foot in pressure-treated wood, or roughly $4,000 to $6,800 for 160–200 feet. Vinyl privacy fence costs more upfront but needs no staining. Gates, removing an old fence, and sloped yards add to the installation cost.
Vinyl fence costs about $23 per linear foot installed in Baton Rouge. A 6-foot vinyl privacy fence runs above that average, and picket or ranch-rail styles run below it. Vinyl costs more than chain link but resists Baton Rouge's humidity and rot and never needs painting or staining.
Yes, Home Depot and Lowe’s both install fences through independent local installers, with a free consultation and a one-year labor warranty. Home Depot reports an average 2025 fence installation cost of $6,300. Lowe’s quotes about two weeks from selection to install and charges extra for removing an old fence. Baton Rouge fence company quotes directly, with no retailer in between.
$25 to $55 per linear foot. Aluminum fence projects average $4,321 nationally for about 96 feet with a gate, with most running $3,000 to $5,500. Aluminum costs less and won’t rust in Baton Rouge’s humidity. Wrought iron is heavier and stronger but needs periodic repainting.
$2 to $7 per linear foot, or $800 to $2,800 for a typical 400-foot yard. Fencing 1 acre costs about $1,600 to $2,000. Wireless DIY kits cost $100 to $325 but give less precise boundaries, and have a shorter life span.
$100 to $400 for fixes like sagging, hinge or latch failures, and post adjustments. Average fence repair costs $618, with most projects between $304 and $948. Electric and automatic gate repair varies with the problem, so the operator needs a diagnosis first. Full gate replacement costs more than repair.
In our experience, Vinyl is the best backyard fence for low maintenance in Baton Rouge. It can last over 30 years and never ever needs restaining. Cedars lasts around ~30 years and is a classic privacy fence. Chain link lasts about 20 years at the lowest cost.
200 feet of fencing in Baton Rouge costs about $2,400 for chain link, $4,600 for vinyl, and $5,000 to $6,800 for wood, based on local per-foot averages. That's enough to fence a typical backyard. Each gate, old fence removal, and grading add to the total.
fence installers in Baton Rouge charge by the linear foot, not by the hour, and the price includes materials, labor, and post setting. When labor is billed hourly, as for small repairs, it typically runs $30 to $80 per hour. Ask for an itemized per-foot quote to compare companies.
An automatic driveway gate costs about $3,140 installed on average, with most projects between $1,525 and $5,135. Adding an electric gate opener to an existing gate costs $625 to $4,750 for the unit plus labor. Gate size, material, solar or hardwired power, and keypad access affect the price.
A pool fence costs about $17 to $34 per linear foot installed, or around $2,550 for 100 feet. Removable mesh pool safety fence is the cheapest at $8 to $15 per foot, and aluminum runs $23 to $40. Louisiana pool barriers must be at least 48 inches tall with self-latching gates.
The best fence company in Baton Rouge is licensed with the Louisiana State Licensing Board for Contractors, insured, and provides itemized written quotes. Look for recent Google reviews, workmanship warranties, and call to hear their experience with Baton Rouge's clay soil and storms. Baton Rouge Fence Co. is fully Licensed, and installs and repairs wood, vinyl, chain link, aluminum, and iron fences and gates